Transmission Lines

Each set is Custom Made to your specifications and are available for any GM powered vehicle with any Engine - Transmission - Radiator combination. Polished Stainless lines run from the Transmission to the front of the Engine where Stainless Braided Hose is crimped on to the tubing. A Stainless Clamp secures the Hard lines to one of your Front Oil Pan Bolts. Hoses are cut to your Custom Lengths with End Fittings for your Radiator. Price: $195.95

Instructions

1. Remove the 2 Stock Brass Fittings in the Transmission.

2. Put Teflon Tape or Paste on the Pipe Threads of the 2-1/4 Pipe x 06 AN Strait Fittings and install in the Transmission.

3. Put Oil on the Flare End of the Fitting and install your lines. Clamp them to one of your Front Oil Pan Bolts.

4. Put Teflon Tape or Paste on the Pipe Threads of your Radiator Fittings and Install in Radiator.

5. Put Oil on the Male AN End of the Radiator Fitting and attach Hoses.

6. Use Oil on 5/16” Inverted Flare Fittings and attach to Radiator.

7. Start your car and check ALL connections for Leaks