|
SINGLE OR DUAL LINE KITS FOR 67-69 CAMAROS
Single and dual lines run in the same position as the original fuel lines. The polished stainless hard lines run on the outside of the passenger side frame rail on the front and on the inside of the frame rail at the rear. The stainless braided “engine to frame kit” for your engine connects the hard lines to the engine, and stainless braided hoses connect the rear lines to your filter and tank. Kit comes with all stainless fittings, screws, clamps, and crimp connectors.
|
|
|
|
|
Complete Tank to Engine Kit for any single line fuel injected engine, comes with fuel filter regulator, engine to frame kit, hard lines, rear hoses, clamps, mounting screws and
tank fittings. $495.00 |
|
Complete Tank to Engine Kit for any 2 line fuel injected engine, comes with fuel filter regulator, engine to frame kit, hard lines, rear hoses, clamps, mounting screws and
tank fittings. $595.00 |
|
|
|
Single Line Kit |
|
|
 |
Single & Dual line kits come with stainless unions connecting front & rear sections, stainless 06 AN ends & stainless clamps with mounting screws.
Single Line Kit $169.00
Dual Line Kit (not pictured) $279.00
|
|
| Single Line Rear Hose Kit |
|
|
|
 |
3 Hose set, Used with single line kit above. All stainless crimped on ends. Comes with tank fittings for stock GM in-tank pump & stainless clamps.
Single Line Rear Hose Kit $ 159.00
|
|
| Dual Line Rear Hose Kit |
|
|
 |
3 Hose set, Used with Dual line kit above. All stainless crimped on ends. Comes with tank fittings for stock GM in-tank pump & stainless clamps.
Dual Line Rear Hose Kit $ 159.00
|
|
| Both Hose Kits have adjustable length tubes to attach to the tank fittings |
|
|
|
| NEW FOR 2008 |
|
 |
This is a new one piece design with a braided hose that attaches to the engine fuel rail and is crimped directly to the stainless hard line on the frame. The hard line runs all the to the filter/regulator mounted just in front of the tank with no fitting in between. Two short hoses plug into the filter/regulator and attach to the 90 degree tank fittings. $495.00 (Lines only, Fuel filter/regulator sold seperately) |
|
| Kit Above works on GM LS1.2.3.6.7 & X, Chrysler 5.7 & 6.1 HEMI, and any other carburated engine. |
|
| Fuel Fitler /Regulator Only $65.00 |
|
|
|
|
 |
|
|
| Filter and engine to frame lines sold separately. |
|
|
NOTE: If you are installing sub-frame connectors between front and rear frame sections, fuel lines must be installed first. * These lines work with in-tank pumps only.
Single line kits 499.00
Dual line kits _________
|
|
Complete your fuel system and check for leaks. See leak check/ disclaimer sheet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|